Churchill Magpie M2 Wall Safe

The Churchill M2 Magpie Wall Safe from Churchill Safes is designed to be installed within a wall and allows it to be hidden from view. It features a high security key lock supplied with two keys as standard and this can be upgraded to either an electronic or mechanical combination lock. The range is available in 4 different sizes and this is the smallest from it.

   Important Facts

• External Dimensions W x H x D: 229mm x 140mm x 121mm
• Door Dimensions W x H: 178mm x 127mm
• Dimension Notes: Upgrading the lock will add 30mm approximately to the external depth - please confirm with us for more information
• Weight: 9kg
• Litres: 3.8 litres

   Locking Details & Insurance Rating

• High security 7 lever double bitted key lock with 2 keys supplied
• Rating of £1,000 for cash & £10,000 for valuables
• No insurance supplied

   Other Sizes and Options

• 4 Sizes in the range
• Electronic and Combination locks available as an upgrade - please allow additional lead time for fitting

   Fire Test Information

• This safe is not tested for fire protection

   Warranty Information

• 1 Year warranty
• Optional upgrade to a 5 year warranty - please call for more details

   Supplied Fittings and Fixing Information

• No shelf supplied
• Designed to be set into a wall using concrete
• No fixing holes

   Installation Information

• Prior to starting work on DIY installation we recommend you check the safe opens and there is no damage
• Remove batteries and instructions inside and keep them to one side until the concrete has dried out
• Next step is to create a space in the wall - this should be 100mm in each direction in addition of the safes measurements
• Create the concrete mix as described in the full instructions that are supplied - ensuring it is not too wet
• Now it is time to put the safe into the cavity you have made - now would be a good time to cover the safe in cling film to protect it during the installation
• Use wedges and a spirit level to ensure the safe is level and start to add the concrete in - ensure the door opens without any issues
• As the concrete will have water in the mix there will be a build up of condensation inside the safe so allow around 3-5 days for it to dry out before use
• It is strongly advised that during installation insulation is added to prevent condensation affecting the safe workings
• Failure of the safe caused by condensation or improper installation is subject to the owners risk

 whatelse

• 1 x Locking bolt
• Internal hinges
• Constructed from a 6mm outer frame and a 10mm door

    Recommended Uses

• Lower value items such as sentimental jewellery
• Can be used as secondary hidden safe
• Ideal for smaller items that need securing such as a wallet or purse
• Valuables up to a level of £10,000 - check with your insurer prior to purchase as ratings can be affected by many factors

Read more Show less